Battery Management Software for Fleet Maintenance
Battery Management Software monitors battery health, voltage, temperature, and lifecycle to prevent failures, improve fleet reliability, and reduce costs.
100%
Live
45°C+
Battery Management Software That Keeps Every Vehicle Charged and Healthy
Battery management software for vehicles watches the battery in each of your vans and trucks, so you know the charge level, the health and any warning signs before a vehicle lets you down. It tracks state of charge, flags a weak or dying battery, and alerts you when power runs low. With AIQ Connect, all of it runs on your own server, under your own brand, with no fee per vehicle.
Live State of Charge
See how much charge every vehicle has right now, live on one screen. For an electric van you get the battery percentage and the range left; for a diesel truck you get the starter battery voltage. Watch the charge climb while plugged in and fall as the vehicle works, so a flat battery never takes you by surprise.
- Live charge level and range for EV batteries
- Starter battery voltage for diesel vehicles
- Charge and drain shown on a simple screen
Battery Health and Degradation
Batteries wear out slowly, and a tired one strands a vehicle at the worst time. AIQ Connect tracks battery health over months, so you can see which batteries are ageing and losing capacity. Spot a pack that no longer holds charge, or a starter battery on its way out, and replace it on your terms.
- Battery health and state of health tracked over time
- See capacity fade before it strands a vehicle
- Plan replacements instead of roadside failures
Low Charge and Voltage Alerts
A low battery is easy to miss until the vehicle will not start. AIQ Connect sends an alert the moment charge drops below your limit, a starter battery reads too low, or an EV needs charging before a trip. Each alert names the vehicle and the reading, so your team fixes it before the morning it matters.
- Alerts for low charge and weak batteries
- EV charge-needed warnings before a trip
- Vehicle and reading on every alert
Charging and Fleet Reports
For an EV fleet, when and where you charge matters for cost and uptime. AIQ Connect logs each charging session and turns battery data into clear reports by vehicle or fleet. See charging patterns, spot batteries that keep running low, and match charge times to cheap power, all from data on your own server.
- Charging sessions logged per EV
- Battery reports by vehicle or whole fleet
- Spot heavy users and off-peak charge windows
Inside the Battery Management Software Console
Live screens from the self-hosted AIQ Connect platform. Your battery data, your server, your brand.
See Every Battery at a Glance
The battery screen shows a charge ring for each vehicle, green when full, amber mid-use and red when low. One look tells you which vans are ready and which need charging tonight. For diesel trucks the same screen shows starter battery voltage, so nothing gets left in the dark.
- Charge ring per vehicle, colour-coded
- Ready, in-use and low states at a glance
- EV charge and diesel voltage on one screen
Get Told Before a Battery Fails
You cannot check every battery, so AIQ Connect watches for you. It sends a typed alert for a low charge, a weak starter voltage, or a pack whose health has dropped. Each alert names the vehicle and the reading, so your team charges or swaps it in time.
- Low charge, voltage and health alerts in one feed
- Alerts by app notification, SMS or email
- Full battery alert history saved per vehicle
Turn Battery Data Into Longer Life
Every reading becomes a report you can act on. See the health of each battery, which ones keep running low, and how charging patterns change over time. Retire a failing pack before it strands a driver, and match charging to off-peak power, so batteries last longer and cost less.
- Battery health ranked across the fleet
- Charging patterns and heavy-use vehicles
- Plan swaps and cut charging costs
Self-Hosted AIQ Connect vs Guesswork and Cloud Battery Apps
Most fleet battery management software is guesswork until a vehicle will not start, or a cloud app that bills per vehicle. Here is how both compare to live battery data on your own server.
| Factor | Guesswork or Cloud App | Self-Hosted AIQ Connect |
|---|---|---|
| Live state of charge | None until it fails | Yes, in real time |
| Battery health over time | No | Yes, tracked for months |
| Low charge and voltage alerts | No | Yes, before a failure |
| EV and diesel in one view | Rarely | Charge and voltage together |
| Where battery data lives | Vendor's cloud | Your own server, permanently |
| Branding on the dashboard | Vendor logo, if any | Your logo and your domain |
| Pricing model | Per-vehicle monthly fee | One-time license, no per-vehicle fees |
From Battery Sensor to Longer Life in Four Steps
Self-hosting sounds heavy. With AIQ Connect the heavy part is done for you, from first call to a branded battery dashboard.
Connect
Link each vehicle's battery data and GPS to AIQ Connect on your server.
Track
The system reads charge, voltage and health for every vehicle, live.
Alert
Low charge, weak power or a health drop triggers an instant alert.
Plan
Use battery reports to charge smart and swap packs before they fail.
AIQ Connect Solutions Beyond Battery Management
One self-hosted platform, white-labeled for your business. Explore the full suite.
EV Fleet Management
Charge, range and battery health tracking built for electric fleets.
Explore solutionVehicle Maintenance Software
Service reminders, work orders and repair tracking driven by live GPS mileage.
Explore solutionGPS Tracking Software
Live location, route history and reports for the whole fleet on your own server.
Explore solutionFuel Management Software
Track fuel use, spot theft and cut costs on your own server.
Explore solutionTransport Management Software
Plan, dispatch, track and bill every consignment from one screen.
Explore solutionField Force Management
GPS attendance, job tracking and productivity reports for field teams.
Explore solution